Quick answer: Private label ski wear is built around a waterproof, breathable shell (about 10,000–20,000 mm), taped seams, synthetic insulation and ski-specific features such as a powder skirt and helmet-compatible hood. Start with 30 pieces per design and plan 2–3 months before the winter season.
Ski and snowboard clothing is technical outerwear: it has to keep riders dry, warm and able to move. This guide explains the specifications buyers need to decide before ordering custom ski jackets, snow pants, bibs and ski suits.
Quick answer
For most resort ski wear, choose a 2-layer polyester or nylon shell rated about 10,000 mm waterproof / 10,000 g breathable, with critically taped seams and synthetic insulation (about 80–120 g/m² in the body). For wetter climates or backcountry, move up to 15,000–20,000 mm, a 3-layer shell and fully taped seams.
Need these made? Ravix Pro Industry in Daska, Sialkot is a sportswear manufacturer for sports clubs and clothing brands in the USA, UK, Europe, Canada and Australia. Custom, OEM and private label production since 2008, with in-house sublimation, printing and embroidery, an MOQ of 30 pieces per design, samples in 7–10 days and bulk in 2–4 weeks. WRAP, BSCI, OEKO-TEX and ISO 9001 certified.
Part of our guide: Custom Sportswear Products · Quick answers
Waterproof and breathability ratings
| Waterproof rating | What it means | Best for |
|---|---|---|
| 5,000 mm | Light snow, dry conditions | Budget and kids’ ski wear, fashion pieces |
| 10,000 mm | Most resort snow | Standard ski and snowboard wear |
| 15,000–20,000 mm | Wet snow, rain, long days | Premium, freeride and backcountry |
Breathability is measured in g/m²/24h: about 5,000 g for casual use, 10,000 g for active skiing and 15,000–20,000 g for high-output touring.
2-layer vs 3-layer shells
| 2-layer | 3-layer | |
|---|---|---|
| Build | Shell bonded to a membrane, with a loose lining | Shell, membrane and inner layer bonded together |
| Feel | Softer, warmer with insulation | Lighter, tougher, more technical |
| Cost | Lower | Higher |
| Best for | Insulated resort jackets and suits | Shell jackets for freeride and touring |
Seams and zips
- Critically taped: only the main exposed seams (shoulders, hood) are taped
- Fully taped: every seam is taped for maximum waterproofing
- Water-resistant zips or storm flaps over zips
Insulation
Most ski wear uses synthetic fill because it stays warm when damp. Brands often map it by zone, for example about 100–120 g/m² in the body and 60–80 g/m² in the sleeves. Shell jackets have no insulation and are layered over fleece or mid-layers.
Ski-specific features
| Jackets | Pants and bibs |
|---|---|
| Helmet-compatible hood, powder skirt, pit zips, ski-pass sleeve pocket, goggle pocket, wrist gaiters | Boot gaiters, scuff guards, vent zips, adjustable waist, bib braces, reinforced knees |
Water-repellent finish (DWR)
A DWR finish makes water bead on the outside. Many brands now ask for PFC-free DWR, especially for EU and UK markets. Specify this in your tech pack.
Branding
Embroidery, reflective and silicone prints, rubber and woven badges, custom zip pullers and printed linings. See branding and decoration.
MOQ and season planning
Ravix Pro’s MOQ is 30 pieces per design with mixed sizes. Sampling takes about 10–14 days and bulk about 3–5 weeks. For Northern Hemisphere winter stock, send designs by June–July; for Australia and New Zealand, by February–March.
Related guides: How to start a ski wear brand · Ski jacket vs snowboard jacket
From our factory floor in Sialkot
At Ravix Pro Industry we have manufactured sportswear since 2008 and now run more than 100 stitching and finishing machines with 150+ workers, producing 20,000+ pieces a month for over 500 brands and clubs in 50+ countries. Every order follows the same 11 steps: quote, design, approval, sample, cutting, decoration, stitching, thread trimming, quality check, packing and door-to-door shipping. Sublimation, screen printing, DTF and embroidery happen in-house, so we control colour, print quality and timing ourselves. See our manufacturing process and quality checks.
Ready to start? Request a free quote for custom ski wear or message us on WhatsApp with your design, quantity and sizes. MOQ from 30 pieces per design. We reply within 24 hours.
FAQs
What waterproof rating should a ski jacket have?
About 10,000 mm for most resort skiing; 15,000–20,000 mm for wet snow, rain or backcountry use.
What is the difference between 2-layer and 3-layer ski jackets?
A 2-layer jacket has a separate lining and suits insulated resort wear; a 3-layer jacket bonds all layers together for a lighter, tougher technical shell.
Do ski jackets need taped seams?
Yes. At least critically taped seams; fully taped seams give the best waterproofing.
What is the MOQ for private label ski wear?
30 pieces per design at Ravix Pro, with mixed sizes.
Can you make one-piece ski suits?
Yes, insulated one-piece suits in retro, race and fashion styles.
